HR Algae remover (1L)
The HR Algae Remover is developed to combat green deposits and prevent the growth of algae and moss. It is easy to use for effectively removing moss and algae from facades, walls, and masonry. HR Algae Remover works on almost all surfaces, such as masonry, wood, concrete, glass, greenhouses, sheds, etc.
It is important to follow the instructions for use. The advantage of using HR Algae Remover over just using a pressure washer is as follows: When you only use a pressure washer, the green deposits will disappear temporarily. Unfortunately, the algae and moss will return quickly because the roots are not addressed. Additionally, it is not beneficial for the surface. The high pressure from the cleaner makes the surface more porous and rough (which gives moss and algae more room to develop). Therefore, we recommend against cleaning with just a pressure washer.
Benefits of HR Algae Remover:
- Prevents future green deposits
- Effective on almost all surfaces
- Very economical to use
- Great penetration depth
- Biodegradable
- Works preventively and long-lasting
- Fast working time
Use:
- Remove green deposits with a pressure washer.
- Wait until the surface is completely dry and no rain is forecast within the next 48 hours.
- Dilute the product in the proper ratio with water (see below).
- Apply the diluted product evenly and continuously with a low-pressure sprayer.
- The recommended temperature for application is between 5°C and 25°C.
- Thoroughly clean the tools used afterward.
HR Algae Remover is supplied in a highly concentrated form. You can dilute it with water in the following ratios:
- For heavy contamination: 1:20
- For normal contamination: 1:30
- For light contamination: 1:40
With 1 liter of diluted product, you can treat approximately 1.5 m².
